08 Jun 2022, Read Time : 4 Min

3 Effective Ways to Fix Wall Dampness – Step by Step Guide

Some people feel the rain while others are worried about their damp walls. Which one are you?

Monsoon is just around the corner. And we are all set to welcome the rain with open arms as it will put a full stop to the sweltering summer heat. It is also the season of making memories, sipping on chai, sitting and eating pakoras on the balcony, the smell of wet mud around, and the sight of lush greenery. It’s so refreshing! But do you know, the season also brings along some eco hazards, one of which is DAMPNESS.

Yes, that’s correct! Some beautiful things come with hideous memories.

But the one that is most affected by the downpour is your house’s walls – Leakage, cracks, mould, fungus. All these can be a nightmare for any homemaker.

What Causes Wall Dampness?

Most constructions, especially old structures, fall prey to dampness and moisture. The wear and tear of the building walls and the aging of the pipelines are some of the significant factors that lead to leakage and damp walls. This is life-threatening for the structural strength of the premise. It creates black mold, a formation of micro fungus on the walls due to moisture, which in turn can cause severe respiratory ailments to the people residing in those houses. So, it is advisable to take matters of damp walls urgently to safeguard oneself from the consequences.

Also Read: What Causes Damp Walls and How to Prevent Dampness?

Be prepared well in advance before the monsoon arrived. Here is a quick guide that will help you fix your damp walls and clear the damp problem. 

1. Identify the Damp Source 

The first step that one must take towards this is to track the root cause of the dampness. Understanding the source, whether it is a leakage issue or a seepage issue, would make the job of finding the solution much easier. Some parts of your home are more prone to dampness and need regular monitoring. And the top of the list is the walls of your home.

If the walls adjoining the bathrooms and kitchen are damp, there is a possibility that the tiles have very minute gaps. Sometimes, there may be cracks on the tiles, which may go unnoticed. The other dominant factor for wall dampness is when the concealed pipes are broken or worn out.

2. Solve that ‘Damp’ Problem

• When cracked tiles and expanded grout lines are pain points: In this case, it is best to fix the broken tiles or to re-conceal all the gaps with epoxy or white cement. It helps in protecting any seepage. So, getting the right quality bathroom tiles from credible brands is also a necessary step. As it increases the life and the quality of bathroom spaces.

• When Pipes are the problem: In the case where the pipes are damaged, there is pretty much no other option than to fix the pipes. This could be long and cumbersome, not to mention a costly remedy to prevent dampness. An alternative would be installing a parallel, alternate pipeline and transferring the water connection. It would undoubtedly salvage the problem and not be as vast a process as the former.

• When ceilings are victims of moisture, seepage and excessive water are logging on surfaces above the ceiling. For example, bathrooms with water storage tanks above could form moist ceilings due to overflowing tanks or improper installation of the tanks.

Depending on the cause, the necessary steps should be undertaken to prevent it from damage. Before installing the tank, cover the base with good-quality tiles to prevent seepage from the ceiling walls. In case of an overflow, cut off the water supply into the tanks at the best capacity.

Check out: How the Right Bathroom Wall Tiles Can Help You Reduce Dampness

3. Waterproofing is the Key

Waterproofing is a short road to preventing dampness and leakages. In current times, there have been significant advancements in waterproofing that have been a boon to the masses. Some very successful waterproofing methods have proven to be both practical and efficient.

• Anti-Damping Rod

An innovative introduction to the markets, these rods are super famous in the western countries, where DIY is their lifestyle. A famous UK-based brand has been the leading innovator of this technology. Wherein one needs to drill holes wide enough for these rods to fit into the walls that have caught the moisture. The rods are nothing but solidified chemicals (looking like silicone rods) that act as agents in securing the walls and absorbing all the moisture. Thus, retaining the life and quality of the walls over a period of time.

•  Other Waterproofing Solutions

In India, many brands  have revolutionized the problem of damp walls with their waterproofing solutions. The process of these solutions, albeit time-consuming and labor-oriented, has proven to be quite effective for the public at large. They are primarily used as a paint-like coating on the innermost layer of walls, thus protecting them against dampness.

Wrap Up

Damp walls can be a problem, but finding the causes backed by undertaking the proper measures will lead to the best solutions. Tiling the walls is always one of the most secure measures one can choose to prevent dampness in the first place.

We hope you found our ideas helpful! If you are looking for a tile solution, then look no further. Upload a picture of your bathroom on TriaLook and see how different tiles look installed in your space?

If you are still unsure, connect with our in-house team of experts who will help you choose the suitable tiles for your space!